You are currently reviewing an older revision of this page.
In Bentley OpenPlant Isometrics Manager, below exercise will illustrate to get INSTR tag with bubble. It can be realized with AutoPLANT Modeler.
In Bentley OpenPlant Isometrics Manager with AutoPLANT Modeler, by default it does not bring over Instrument tags nor is there an “out of box” method for placing a tag in an Instrument Bubble. Most users will require this capability, so below steps will describe to get TAGNUMBER into OPIM and inserted into a Bubble Cell. Below is a default representation of how an instrument is shown in OPIM.
This will execute in 3 steps: A. Mapping the MODEL property. B. Creating a New cell for the instrument bubble. C. Creating a New User Label for the Instrument Bubble
A. Mapping the MODEL property.
Note: Although we are doing this for the Instrument Gauge, you may want to map this Property directly under the INSTRUMENTS class so this is mapped for all instrument classes, not just GAUGE.
B. Creating a New cell for Instrument Bubble.
C. Creating a New User Label for the Instrument Bubble
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!