You are currently reviewing an older revision of this page.
In OpenPlant Isometrics Manager, BOM report information may require weight information along with Total weight of component and Weight summary information. Below are some settings in report.def file shown which could be utilized to get the desired output in OpenPlant Isometrics Manager BOM report.
In OpenPlant Isometrics Manager, using OpenPlant Modeler/AutoPLANT Modeler, BOM report information may require weight information along with Total weight of component and Weight summary information. It can be achieve through modifying report.def file under style folder present under each project. Various types of reports can be created and stored under style folder, which can be later utilized by renaming the files by user. Below information will help user to achieve various types of settings using OpenPlant Modeler and OpenPlant Isometrics Manager.
Additional Notes:
To get the weight in the report you can just use this:
COLUMN = 10: 3R : DRY_WEIGHT
The 3R means: display with 3 decimals accuracy and right align. This will give a uniform display
In order to get a total weight for all the components mentioned in a single BOM line you would use:
COLUMN = 10: A3R :DRY_WEIGHT
The A3R means: display with 3 decimals accuracy, right align and accumulate all the DRY_WEIGHT values
Configuring the BOM and Reports- http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12642.configuring-the-bom-and-reports
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/18047.how-to-create-various-bom-report-types-in-openplant-isometrics-manager
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/19110.how-to-accumulate-weight-information-in-the-bill-of-material
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!