Applies To
Product(s):	OpenPlant Isometrics Manager
Version(s):	08.11.09.XXX & Others
Environment:	Windows 7 (64 bit)
Area:	-
Subarea:	-
Original Author:	Bentley Product Advantage Group

Isometrics generation Errors/ Reading Logs/Message dialogs/Crashes

While working on modelling software, it is quite natural that some errors, crashes, warning messages may generates. Modeler may expect different scenario to deal with all type of conditions, be it will be working pattern/behavior, certain investigation or customization which results to some ambiguous results, error, crashes etc. We will be discussing here some of the relevant or common errors which can be fixed, to discuss, and to be taken care of, and most important to avoid such scenarios. 

Considering the common platform for Both OpenPlant Modeler and AutoPLANT Modeler the issue will be discussed here. 

See Index:

For OpenPlant Modeler-OpenPlant Isometrics Manager

1. "Error Copying Document to the Client" While Loading I-model
2. "Error: = 1603" While Installation of OpenPlant Isometrics Manager
3. Description for Bolts, Gaskets not Getting Inside Isometric BOM & Showing as "NODESC"
4. Error "Empty Path Name is not legal" Pops Up at Startup
5. Error Distance Between Gasket [Gasket][GUID No] & Adjoin Components could be more than 1.5
6. Error Loading I-model: Unable to Validate Expression Properties
7. Error on loading I-model from managed workspace in OpenPlant Isometrics Manager
8. Error While Reading ECSchema 'OpenPlant_3D.01.04
9. Error [5] Unable to locate addon (ID=XXX) to component
10. Error: i-model master unit 'Feet' is not matching with 'MILLIMETERS', specified as PROJ_MASTER_UNIT in OPModeler_MMetric project pcf. You might have selected wrong workspace project or i-model.
11. Error: An internal error occurred.Could not start responsive Microstation server.
12. Error: Could not start IMODEL Engine Process in 60 seconds.
13. Error: Exception has been thrown by the target of an invocation. Argument 'ecProperty for msi_TransactionID' cannot be a null value
14. error-weld-weld-123xxxxxxxxguid-is-not-connected-to-pipe
15. Error:[5] Detail Sketch Not found in cell libraries
16. Error:[5] Unable to Place symbol when use custom seed file (backing sheet).
17. Error[0]:SYS mismatch CP/CP count: component ID = 1 in OpenPlant Isometrics Manager
18. Error[5]Cell not found in libraries: GATSW_FT
19. Fixing Sheet No. Issues in OpenPlant Isometrics Manager
20. Isometric successfully, but PCF generation failed Message in OpenPlant Isometrics Manager
21. Mating Flange Orients in Wrong Direction when Output as DWG in OpenPlant Isometrics Manager
22. Unable to Launch OpenPlant Isometrics Manager
23. Unable to Load i-model in OpenPlant Isometrics Manager

For AutoPLANT Modeler-OpenPlant Isometrics Manager

1. "Error Copying Document to the Client" While Loading I-model
2. "Error: = 1603" While Installation of OpenPlant Isometrics Manager
3. Description for Bolts, Gaskets not Getting Inside Isometric BOM & Showing as "NODESC"
4. Displays Error[5]-DWG creation failed While Generating Isometric Output as DWG Format
5. Element ‘VALVE_HAS_VALVE_OPERATING _DEVICE’ is missing required attribute ‘sourceClass’
6. Error Distance Between Gasket [Gasket][GUID No] & Adjoin Components could be more than 1.5
7. Error mapping of component AT_P50ZJ9Y8_61 not found: AT_PVIC_AT_SOCKETWELD
8. Error: i-model master unit 'Feet' is not matching with 'MILLIMETERS', specified as PROJ_MASTER_UNIT in OPModeler_MMetric project pcf. You might have selected wrong workspace project or i-model.
9. Error: Could not start IMODEL Engine Process in 60 seconds.
10. Error: XCHG0000: Invalid Translation Format: OPIM in OpenPlant Isometrics Manager
11. Error:[5] Detail Sketch Not found in cell libraries
12. Error:[5] Unable to Place symbol when use custom seed file (backing sheet).
13. Error:The Process cannot Access the File in OpenPlant Isometrics Manager
14. Error[0]:SYS mismatch CP/CP count: component ID = 1 in OpenPlant Isometrics Manager
15. Error[5]Cell not found in libraries: GATSW_FT
16. Fixing Sheet No. Issues in OpenPlant Isometrics Manager
17. Isometric successfully, but PCF generation failed Message in OpenPlant Isometrics Manager
18. Mating Flange Orients in Wrong Direction when Output as DWG in OpenPlant Isometrics Manager
19. Scaler, Symbols or Item code are missing for TAP_CONNECTION error message when Branch Connected Through Stub-In Tapport
20. To Avoid Crash for End Types WFL & Butt Weld Connections in Isometrics
21. To Include Lug Type of Bolts in Generated Isometric
22. To Remove BOM Text Wrapping Issue in Generated Isometrics
23. Unresolved References Error on Opening DWG Isometric in AutoCAD

See Also

Product TechNotes and FAQs

OpenPlant Isometrics Manager [FAQ]

External Links

Check Videos Content - LEARN Server

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!