How to Suppress ‘UBR_STUB_IN’ in OpenPlant Isometrics Manager Bill of Material

Problem Description

While generating an isometric through OpenPlant Isometrics Manager, it counts UBR_STUB_IN in the bill of materials, however some user requirements is to add only reinforcement pad in the bill of materials.

Following steps will help the user to suppress UBR_STUB_IN material from the BOM and remove related part id values from the isometric.

AutoPLANT Modeler-OpenPlant Isometrics Manager

Steps to Resolve

1. Launch OpenPlant Isometrics Manager.
2. From "Isometric Configuration" settings, open Isometric Style tab.
3. From Advanced node, click on ‘Open Report definition’ file. See image below.
   
   
   
   Note:For an AutoPLANT user, the reportdef file  can be open by navigating to project path under style>config Folder, C:\ProgramData\Bentley\Plant V8i\Bentley Plant V8i Projects\SAMPLE_METRIC\Config\OpenPlant \Isometrics \styles\IFC\config\report.def 
   
   
4. Edit report.def file as per below image.
   
   
   
5. Save and close the file.
6. Now open rep_sortgroups.txt file in notepad.
7. Edit entry as per below image.
   
   
8. Save and close the file.
9. Generate the isometric to review the result.

See Also

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!