In OpenPlant Isometrics Manager, user requirement is to get Additional Material information in drawing as well as in BOM reports.
In OpenPlant Isometrics Manager, using OpenPlant Modeler, user wanted to assign additional material notes on components and desire to see it in ISO drawing as well as in BOM report. Below are the workaround provided to achieve the settings and this could be done till it gets fixed to next version of release. This could be realized using both AutoPLANT Modeler and OpenPlant Modeler user with OpenPlant Isometrics Manager. Check below steps described for both ways.
A. Using OpenPlant Modeler & OpenPlant Isometrics Manager
To assign the Text node for Notes.
REPORT = NOTEINCLUDE = IE_TYPE=CT_ADDITEM
TEXT = @ NOTES:TEXT = @ COLUMN = 30: w : TEXTNODE = 111END
To define the attribute in Report.def file.
B. Using AutoPLANT Modeler & OpenPlant Isometrics Manager
Below steps has been illustrated to show Additional material information on isometric BOM and as labels on Pipe.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12642.configuring-the-bom-and-reports
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/20660.to-add-new-property-on-notes-in-openplant-modeler
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!