You are currently reviewing an older revision of this page.
In OpenPlant Isometrics Manager, during isometrics generation it displays details sketch error as Error:[N] Detail Sketch Not found in cell libraries: CELLNAME
In OpenPlant Isometrics Manager, user might receive an error as described below: Error:[5] Detail Sketch Not found in cell libraries: TEST3 Error:[5] Detail Sketch Not found in cell libraries: TEST2 Error:[5] Detail Sketch Not found in cell libraries: TEST
In below log, it can be noticed that it throws errors for 3 missing cell files namely TEST3, TEST2 & TEST.
Below steps will aid user to avoid such errors. Below example and error caused shown here using OpenPlant Modeler and OpenPlant Isometrics Manager. However similar instances might occur using AutoPLANT modeler and OpenPlant Isometrics Manager.
The above errors mentioned due to missing cel file present inside the CELL folder which is found under each styles for isometrics. User has to check detail_sketch.cel file based on the cel defined inside the OpenPlant Modeler.
Check list
If above problem still persist, then please create a Service Request and contact Bentley Product Advantage group along with the list of all relevant details to get in depth analysis and for possible solution or workarounds.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/19701.how-to-add-detail-sketches-in-openplant-isometrics-manager-using-openplant-modeler
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/13885.how-to-add-detail-sketches-in-openplant-isometric
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!