In OpenPlant Isometrics Manager, during loading an i Model, it displays Failed to load 1 out of 1 i-models.
In OpenPlant Isometrics Manager, user might receive an error as described below:
Error: i-model master unit 'Feet' is not matching with 'MILLIMETERS', specified as PROJ_MASTER_UNIT in OPModeler_MMetric project pcf. You might have selected wrong workspace project or i-model.
Below steps will aid user to avoid such errors. Below example and error caused shown here using OpenPlant Modeler and OpenPlant Isometrics Manager.
The above errors mentioned due to wrong selection of Project unit or using wrong I model processed in different project unit. User has to ensure the correct Project unit and its corresponding I model.
If above problem still persist, then please create a Service Request and contact Bentley Product Advantage group along with the list of all relevant details to get in depth analysis and for possible solution or workarounds.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!