Adding Iso Sheet Information on Piping Components in OpenPlant Modeler.
In OpenPlant Modeler, piping component information comes from its relative properties and classes assigned on them using schemas. In below steps, the discussion can be seen to assign Iso Sheet information on all piping components which can be further utilized in various exporting utilities and to filter those components based on Iso Sheet information.
For Iso-Sheet Name on SUPPORTS
NOTE: It may happen that you see failure value in element information dialog but if you check the same support in item browser, you will see correct values in there. This is a known issue to us and defect is already logged for it. To update the values in element information dialog double click on the handler of pipe segment on which the supports are placed and then double click on the handlers/manipulators of the supports as shown below. This should update the values in element info dialog.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!