OpenPlant Isometrics Manager swap the spec labels for a pipeline. Below description will aid user to fix the problem.
In user’s customized environment, SPEC_CHANGE cell reverse the order of spec label which is incorrect. This may happen due to some settings modified by user in SPEC_CHANGE cell or it may get corrupted. Below problem describes about the same case for SPEC_CHANGE cell by virtue of which it changes the spec description back to front. See image below for reference. Below steps will provide solution to all problems discussed above. This has been realized in context with Both AutoPLANT Modeler and OpenPlant Modeler. Below case has been taken using OpenPlant Modeler and OpenPlant Isometrics Manager.
An Alternate Method To Check:
While writing the Spec symbol shown in cell file, Left hand Side Text should be written first and then a Right Hand Side Text should be written. This will allow user to get the correct labeling. In same SPEC_CHANGE cell present under lisocomp.cel file, User can open that cell for editing and can try below steps to recover the same file.
Below link on Modifying the cell template.
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!