To Add Support Class to be read by spec in OpenPlant Modeler.
In OpenPlant Modeler some of the classes do not get read by spec and are kept assigned for modeler at the time of modelling. One of the example we discuss here on DOUBLE_PIPE_TRUNNION class. The SINGLE_PIPE_TRUNNION class is set to read from the Supports.mdb but the Double Pipe trunnion class relies on user inputs. Similar attempts done on desired class by copying the custom attributes and properties. Below are the steps which will aid user achieve the desired settings.
This can be done in two major steps:
A. Creating the Spec for DOUBLE_PIPE_TRUNNION.
B. Schema update.
If above problem still persist, then please create a Service Request and contact Bentley Product Advantage group along with the list of all relevant details to get in depth analysis and for possible solution or workarounds.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/13028.openplant-specification-generator
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!