To Display Multiple Rows for Notes as Labels


  
 Applies To 
  
 Product(s):OpenPlant Isometrics Manager
 Version(s):08.11.09.440 & above
 Environment: Windows 7 (64 bit)
 Area: Settings/Attributes
 Subarea: 
 Original Author:Rahul Kumar, Bentley Product Advantage Group
  

Overview

In OpenPlant Isometrics Manager, to show multiple rows for notes.

Problem Description

In OpenPlant Isometrics Manager, Notes appear in one line and content which has multiple rows does not appear in isometric drawing as labels. See image below with the current situation.

          

Steps to Resolve

  1. Launch OpenPlant Modeler, select Project, say OPModeler_Metric here.

  2. Place a Pipe and few components to it.

  3. From Piping Tab, select “Place Note” option.

  4. Select Note from drop down. 



  5. To display multiple rows in isometric labels use ‘$’ sign in between the sentences. See below.



  6. Place it on a pipeline. Publish an I model.

  7. Launch OpenPlant Isometrics Manager, generate isometrics & verify results. See image below.

Still a Problem?

If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround. 

See Also

communities.bentley.com/.../13393.settingsattributes-openplant-isometrics-manager

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!