To Query the Mating Components Based on Auto-Match


Applies To
Product(s):OpenPlant Modeler
Version(s):08.11.09.XXX (SS5)
Environment: Windows 7/8.1/10 (64 bit)
Area: Component
Subarea:
Original Author:Harpreet Singh, Bentley Product Advantage Group

Problem Description

Currently, when using Auto-Match option mating components get the property from adjacent components but they are not actually queried from spec. User requirement was to query the mating components based on rating of component placed. However, same procedure can be followed in case of other properties.

Steps to Resolve

  1. Open 'MatchOptions.xml' file from \\Workspace\OPModeler\System  folder.



  2. Change 'IncludeInQuery' condition to TRUE for RATING property as shown below.



  3. Save the changes and relaunch OpenPlant Modeler to verify the result..

NOTE: Currently, this will not work correctly with inline placement of components. However, with manual placement of components this setting works perfectly.

See Also

communities.bentley.com/.../component---openplant-modeler

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!