You are currently reviewing an older revision of this page.
Some users may require an Isometric drawing without Tagging, Spooling, Dimensions or Bill of Material Information. Use the following to remove all or some or all of this information from the Isomeric output as is required. It Can be realized using both AutoPLANT Modeler & OpenPlant Modeler with OpenPlant Isometrics Manager
BOM tagging
SORTGROUP = SKIPALL
RULE=IE_TYPE=CT.*
SKIP = 1
Remove the Spool labels and other labels
Remove Dimensions
Remove Pipe size labels
Remove Coordinate labels
Remove the BOM output
#REPORT = combi
# WRITE = shp
# TEXT = @
# WRITE = fld
# NODE = 60
#END
#REPORT = CUT
# INCLUDE = IE_TYPE=CT_PIPE|CT_BEND
# COLUMN = 6:C:CUTID
# COLUMN = 7:R:SIZE1
# COLUMN = 21:R:QUANTITY
# COLUMN = 3:R:
# COLUMN = 80:W:IE_DESCRIPT
# GROUP = CUTID
# SORT = CUTID
# NODE = 61
Note - If Whole Report needed to remove then comment with # before REPORT, otherwise comment with # sign before specific column to not display in BOM.
Remove Slope hatching
If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12641.modifying-the-iso-content
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!