You are currently reviewing an older revision of this page.
Some users may require an Isometric drawing without Tagging, Spooling, Dimensions or Bill of Material Information. Use the following to remove all or some or all of this information from the Isomeric output as is required. Both AutoPLANT Modeler & OpenPlant Modeler can utilize the following procedures.
BOM tagging
SORTGROUP = SKIPALL
RULE=IE_TYPE=CT.*
SKIP = 1
Remove the Spool labels and other labels
Remove Dimensions
Remove Pipe size labels
Remove Coordinate labels
Remove the BOM output
#REPORT = combi
# WRITE = shp
# TEXT = @
# WRITE = fld
# NODE = 60
#END
#REPORT = CUT
# INCLUDE = IE_TYPE=CT_PIPE|CT_BEND
# COLUMN = 6:C:CUTID
# COLUMN = 7:R:SIZE1
# COLUMN = 21:R:QUANTITY
# COLUMN = 3:R:
# COLUMN = 80:W:IE_DESCRIPT
# GROUP = CUTID
# SORT = CUTID
# NODE = 61
Note - To remove any report section then insert # before REPORT, otherwise use # sign before specific column to not display in BOM.
Remove Slope hatching
If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12641.modifying-the-iso-content
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!