Background

There is a requirement from user that when placing a nozzle on equipment, nozzle tag should be annotated which doesn't have equipment tag in it. For example, if nozzle tag is calculated as V-001-N1, only N1 should be annotated after placement.

Steps to Accomplish

1. Launch class editor and load OpenPlant_PID schema.
   
   
2. Supplement it with OpenPlant_PID_Supplemental_Imperial schema.
   
   
3. Go to NOZZLE class and switch to Properties tab.
   
   
   
   
4. Add new property and name it 'NOZZLE_NAME'.
   
   
   
   
5. Add Category custom attribute on it and key-in the values as shown below:
   
   
   
   
6. Add another attribute 'Calculated ECProperty Specification' and add below expression.
   
   this.DEVICE_TYPE_CODE & this.NUMBER
   
   
   
   
7. Similarly add 'Annotation Custom Attribute' on it and set below values.
   
   
   
   
8. Save the changes in schema and verify the result.
   
   

See Video:

How to Annotate Nozzle Tag after Placement

By Nikhil Salunkhe over 5 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Files

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!