You are currently reviewing an older revision of this page.
OpenPlant Isometrics Manager generates an error[0]:SYS mismatch CP/CP count: component ID = 1
With user defined class as TEST_3_STAGE under Multistage Valve, while generating isometrics. It reports an error. See below. error[0]:SYS mismatch CP/CP count: component ID = 1
On Defining new class, it is also required to be present inside the ipscript.txt file. Adding the class under each stage in ipscript.txt file would solve the purpose.Below solution has been described using OpenPlant Modeler & OpenPlant Isometrics Manager.
error[0]:SYS mismatch CP/CP count error might occur with different conditions, which can be further added & discussed in this article.
If above problem still persist, then please create a Service Request and contact Bentley Product Advantage group along with the list of all relevant details to get in depth analysis and for possible solution or workarounds.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/27182.to-fix-multi-way-valve-symbol-issue-in-openplant-isometrics-manager
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!