BRCM InfoThe command is not available in this design file!
The tool that was selected is not compatible with the Content type of the DGN file that is open. For example, using Raceway design tools in an "Equipment" type file will result in the message. The Content type of the files in the project can be viewed in BRCM Setup > Document Manager.
Most tools in the BRCM Conceptual Design task must be used in a "Conceptual Design" Content DGN file.
Most tools in the BRCM Detail Design task must be used in a DGN file that has a Content type with "Raceway" in the name. This includes raceway tools, duct bank tools, trench tools.
Equipment related tools, including Equipment Manager and Equipment Properties, must be used in a DGN file that has a Content type of "3D Model, Equipment" or "3D Model, Equipment * Raceway".
The Cable List Import from Excel tool must be used in a DGN file that has a Content type of "3D Model, Equipment" or "3D Model, Equipment * Raceway".
Cable Manager must be used in the DGN file registered with the "Routing File" Content type.
Tools in the BRCM 2D Extraction task must be used in a DGN file that has a Content type of "2D Extraction" .
Select File > Open from the main pull-down menus.
Select and open the appropriate DGN file. This file must be in project's folder. It may be necessary to create a new DGN file and register it with the desired content type (see instructions for using Document Manager in Option 2 below).
The Content type is not intended to be changed frequently so that any tool can be used in a given DGN file. It is appropriate to change the content type from "3D Model, Raceway" to "3D Model, Equipment * Raceway" if the intent is to insert equipment in addition to raceway into the model. It is not appropriate to change from "3D Model, Raceway" to "Routing Model" to try to use Cable Manager in raceway file.
To change the Content type of the currently open DGN file: