Overview

During isometrics generation in OpenPlant Isometrics Manager, below steps provides information on dimensioning of Gasket and Valve Separately. 

Problem Description

While generating Isometric Sheet, User requires that the Gasket and Valve are dimensioned Separately. 

Steps to Resolve

1. Launch OpenPlant Isometrics Manager.
   
   
2. Under the Tools Tab> Configurations> Isometric Styles> uncheck (Combine Gasket with Flange).
   
   
3. Check the box ( Dimension Gasket ).
   
   
   
   
4. Save Changes and close Configuration Manager and regenerate Iso Sheet. 

See Also

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/13393.settingsattributes-openplant-isometrics-manager

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/4351.openplant-isometrics-manager

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/20482.to-dimension-valve-with-gasket-in-openplant-isometric-manager

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!