You are currently reviewing an older revision of this page.
User needed to accomplish rounding to the nearest inch of the pipe length inside Isometrics Manager.
Steps to accomplish:
1) Launch Open Plant Isometrics Manager.
2) Workspace- Project> OPM_ Imperial> OK
3) Go to: Tools> Configurations> Isometric Style> Advanced> Explore Style
4) From Config folder> Open style.cfg file for customization.
5) Locate ACCURACY (imperial only)> change length from 16 to 1
6) Make sure to save changes and close.
7) Generate drawing to verify results.
Comments or Corrections?