To Fix Overlap Components display In OpenPlant Isometrics Manager


  
 Applies To 
  
 Product(s): OpenPlant Isometrics Manager
 Version(s):08.11.09.xxx (SS5) / 08.11.11.87 (SS6)
 Environment: Windows 7 (64 bit) & others
 Area: Settings/Attributes
 Subarea: 
 Original Author: Rahul Kumar, Bentley Product Advantage Group
  

Overview

In OpenPlant Isometrics Manager, to discuss various overlap issue.

Problem Description

In OpenPlant Isometrics Manager, it has been observed during isometric generation, that few components get overlapped with each other or during generation it does not give a clear view. Apart from fixes and enhancements, there are several ways to fix those issues and can be applied in running project. In below discussion, some of the cases has been illustrated. See below image for where a custom component gets overlapped with an elbow when an Isometric break point got placed between elbow & component.

In OpenPlant Modeler

          

In OpenPlant Isometrics Manager

          

Steps to Resolve

  1. Launch OpenPlant Isometric Manager. Select project unit.

  2. Open “Isometric Configuration” dialog.

  3. Go to Isometric Management tab and select “Isometric Continuity Options”.

  4. In Last continuing components field, click on “…” 3 dot present at corner and select the option as “ISOMETRIC_BREAK_POINT”. See image below. 



    Note – This will allow stop showing the continuity option at isometric break point. 

  5. Set Max Iso continuing components option to 0 like shown in below setting modified. 



    Note – Here user can set desirable numbers to avoid overlaps and try various combinations to avoid such problem.
  6. Save dialog box.

  7. Generate Isometrics & verify results. See image below. 

Still a Problem?

If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround. 

See Also

communities.bentley.com/.../12641.modifying-the-isometric-content

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!