Applies To
	Product(s):	OpenPlant Modeler
	Version(s):	08.11.09.XXX & Higher
	Environment:	Windows 7/8/10 (64 bit)
	Area:	Component
	Subarea:
	Original Author:	Harpreet Singh, Bentley Product Advantage Group

Background

In OpenPlant Modeler, bolts and gaskets are designated as construction elements so they don't work the same way as other piping components do. But you can show/hide all the bolts and gaskets in a model with one command.

Steps to Accomplish

1. Open the model in OpenPlant Modeler.
   
   
2. Go to View Attributes as shown below or hit Ctrl + B on your keyboard.
   
   
   
   
3. Turn off the construction to hide the bolts and gaskets from the model.
   
   
   
   
4. Turn it back ON to show the bolts and gaskets.
   
   
   
   

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!