Applies To
Product(s):
OpenPlant Modeler
Version(s):
08.11.11.87
Environment:
Windows 7/8/10 (64 bit)
Area:
Component
Subarea:
Placement
Original Author:
Faisal Khan, Bentley Product Advantage Group
To fix the display issue for fasteners in OpenPlant Modeler.
In OpenPlant Modeler, for flanged component fastener graphics are not populating properly. Though in connectivity check there is no error.Reason
In OpenPlant Modeler, components are fetched from the spec. Hence it must be set True for option IsFastenerSpec Driven.
Steps to Resolve
If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/30012.how-to-showhide-bolts-and-gaskets-in-openplant-modeler
Comments or Corrections?
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!