Background

In OpenPlant Isometrics Manager, for eccentric reducer there is no offset details by default. See image below after producing isometrics with default setup.

However, as per requirement user may add labels to display it in isometric drawing.

OpenPlant Modeler-OpenPlant Isometrics Manager

Steps to Accomplish

1. Launch OpenPlant Isometrics Manager.
2. Select Project unit, say OPModeler_Metric here and click OK.
3. From Isometric configuration dialog, select “User Labels” node. 
   
4. Add new Label, and enter value as shown in below image.
   
   For Imperial Unit
   
   Name ECCENTRIC OFFSET
   Include EC_CLASS=ECCENTRIC_PIPE_REDUCER
   Text $(DIM1:I) Offset
   Type PLANTC
   Cell Name PLANTC
   
   
   
   For Metric Unit
   
   Name ECCENTRIC OFFSET
   Include EC_CLASS=ECCENTRIC_PIPE_REDUCER
   Text $(DIM1:.0f) Offset
   Type PLANTC
   Cell Name PLANTC
   
   
   
   
5. Save Settings.
   
6. Launch OpenPlant Isometrics Manager and verify results.
   
   For Imperial Unit
   
   
   
   For Metric Unit
   
   

AutoPLANT Modeler-OpenPlant Isometrics Manager

Steps to Accomplish

1. Open "Isometric configuration" through Project Administrator. 
2. Select Settings option and click on "Create/Modify" option.
   
   
    
3. In Isometric Configuration window select the desired Style.
4.  Add new Label, and enter value as shown in below image.
   
   For Imperial Unit
   
   Name ECCENTRIC OFFSET
   Include EC_CLASS=ECCENTRIC_PIPE_REDUCER
   Text $(DIM1:I) Offset
   Type PLANTC
   Cell Name PLANTC
   
   
   
   For Metric Unit
   
   Name ECCENTRIC OFFSET
   Include EC_CLASS=ECCENTRIC_PIPE_REDUCER
   Text $(DIM1:.0f) Offset
   Type PLANTC
   Cell Name PLANTC
   
   
   
   
5. Save Settings.
6. Launch OpenPlant Isometrics Manager and verify results.
   
   For Imperial Unit
   
   
   
   For Metric Unit
   
   

See Also

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12641.modifying-the-isometric-content

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!