How to Show Support Components Under Field or Shop Material list in BOM

Background

By default all AutoPLANT Modeler support components in OPIM are placed in Shop material list.


User requirement is to set required Supports in AutoPLANT Modeler as SHOP or FIELD components and have them placed in generated Isometrics inside Field or Shop matterial list accordingly. Below steps will help to achieve this requirement.

AutoPLANT Modeler - OpenPlant Isometrics Manager

Steps to resolve

1. Open OpenPlant_3D.01.07. ecschema using Bentley Class Editor.
   
   Path: C:\ProgramData\Bentley\Plant V8i\Bentley Plant V8i Projects\SAMPLE_METRIC\Config\OpenPlant\schemas
   
   
2. Navigate to Piping Component class, select on Properties section, right click on SHOP_FIELD property & select Custom Attributes>Copy to copy AutoPLANT_PDW_Property_Map custom attribute as shown below.
   
   
   
   
   
3. Navigate to Support class, select on Properties section, right click on SHOP_FIELD property & select Custom Attributes>Paste to paste AutoPLANT_PDW_Property_Map custom attribute as shown below
   
   
   
4. Save all the settings & verify the result as shown below.
   
   
   

See Also

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/12642.configuring-the-bom-and-reports

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround. 

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU