How to annotate the Eccentric Reducer Flat side note in AutoPLANT Isometrics Extraction
By default the Flat Side of Reducer is not shown in the Isometric Drawing. User need to make certain changes in the Project Administrator to achieve that.
1. Open Project Administrator.
2. In Project Administrator edit the Alternate Text as per below mentioned screenshot.
3. In the Alternate Text Editor open the Offset 1 tab as mentioned in the below screenshot.
4. In the offset 1 tab the annotation can be changed to Flat as mentioned in the below screenshot.
5. Save the changes made and generate the Isometric to check/confirm the results.
Product TechNotes and FAQs
Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!