To Show Overall Outside Dimensions only in Orthographics Manager’s Output Drawing

Background

If user wants to see overall outside dimensions only in output, then it is possible by following below mentioned steps.

Steps to Accomplish

1. Launch OpenPlant Orthographics Manager and select a project 
   
   
   
   
2. Go to Drawing Generation -- > Generate
   
   
   
   
3. Select “demo-all” VAD file and Press “Generate Drawings”
   
   
   
   
4. Output will be generated and outside labels as well as outside dimensions for all components will be shown in output
   
   
   
   
5. Go to Drawing Generation -- > Options
   
   
   
   
6. “Options” will be displayed
   
   
   
   
7. Select “Global Dimension” from Outside label and dimensions drop down options
   
   
   
   
8. Save the changes by pressing save enabled button
   
   
   
   
9. Go to Drawing Generation -- > Generate
   
   
   
   
10. Select “demo-all” VAD file and Press “Generate Drawings”
    
    
    
    
11. Output will be generated and only overall outside dimensions will be shown in output
    
    

See Also 

http://communities.bentley.com/products/plant/design___engineering/w/plant_design_and_engineering__wiki/30252.how-to-generate-output-drawing-in-openplant-orthographics-manager

https://communities.bentley.com/products/plant/w/plant_design_and_engineering__wiki/38575/how-to-turn-off-outside-labels-and-dimensions

OpenPlant Orthographics Manager Help