You are currently reviewing an older revision of this page.
User is using some components for which special information like Stamp informing about those components should be added in generated isometrics model. Whole this process should be automated and if drawing contains those special components, then required stamps always should be placed in Isometrics.
In below steps we will try to explain how to create special stamp for Stud Bolts by using cells from detail_sketch.cell file
Same procedure can be fallowed for any other required stamp. All stamps will be always placed on same locations and if there will be models with several Stamps, then all those will be listed one by one from right to left side.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!