How to add Spec Criteria in Project Isometrics

Overview

How to add SPEC Criteria in Project Iso so as user can use Spec Criteria for Project Iso

Background

User requirement to add Spec as default Break Criteria in the Project Iso.

Steps to Accomplish

1. Navigate to the OpenPlant folder of the specified Project where Spec need to be added in the given Isostyle.
   
   
2. Open OPIM.ini file and add Spec Criteria manually as shown below.
   
   
   
   
3. Once the above changes are made generate the Isometrics and verify that Spec Criteria is coming in Isometrics dropdown Window.
   
   

See Also

AutoPLANT Modeler V8i

AutoPLANT® Modeler is a spec-driven, advanced 3D plant design and modeling application. AutoPLANT® Modeler combines the tools to create intelligent Piping, Equipment, Raceways, and Isometrics in one tightly…

Last edited over 3 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki

Still a Problem?

If above problem still persist, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround. 

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!