Questions about this article, topic, or product? Click here. 

Resolved issues in Bentley Raceway and Cable Management CONNECT Update 1, 10.01.00.21

Bentley internal tracking number  Item type Description
151326 Defect Conceptual design - i model import
358483 Enhancement Update help file with supports placement section
358484 Enhancement Update help file with enhancements in cable management
390678 Enhancement Raceway ID: include leading zeros in Start Value
433164 Defect Long Cable type doesn´t show Raceway fill and color code
434071 Defect After click OK in Status Manager, the Node Names in Cable Manager display incorrectly
569700 Enhancement Separate parts on BOQ report by product code (PCode)
613353 Defect Blank UDA values, Connect raceway, leads to separate line items on BOQ
616800 Defect [CleanupDNAs]Remove not supported DNAVariables from DNA-Files
700357 Defect Name entry in SPEC_CableFill.xml to long, incorrect raceway fill info
705299 Defect [3DCableVisualization] 3D Cables do not take correct path
706233 Defect [3DCableVisualization] 3D cables slide of the cable tray and are shown outside of cable tray
706252 Defect [3DCableVisualization] 3D cables bend are outside cable tray.
707564 Defect [3DCableVisualization] Cannot generate 3D cables visualization for the first time
719343 Defect Remove "Reference Height" option from Section cut
857532 Defect New cell-based Equipment without _3D in cellname
887510 Enhancement Automatic routing line placement between cable trays and conduits
894494 Enhancement  New Cross Section Template for the details Serial No, Cable Number, Cable type, Size and Weight
902290 Defect BRCM: Genarating concrete for duct bank with millimeters as MU results in BRCM getting locked up
902905 Enhancement Adding BRCM compatibility with Windows Server 2012 OS and Citrix 7.6 Enviornment
905850 Defect BRCM: Using a text value for format attribute in CSECTION XML file causes incorrect table generation using that section.
916646 Defect Imports I-MODEL files to BRCM，if  there is equipment on the drawing , then BRCM can not read any I-MODEL information
923688 Defect [Create New Raceway Catalog] It should give clear prompt when remove Value under the Fittings tab
925800 Defect [Publish i-model] The device in published i-model file opened in MicroStation is duplicated
934376 Defect iModel publish message
935817 Defect Zoom and pan commands don't work with equipment placement
935840 Defect Incorrect tool focus after RW is selected
937750 Defect [Output Manager] Report cannot be updated after update database
939155 Defect [Equipment Manager] It crashed when create and place new equipment, then click Equipment Properties to review it
939575 Defect [Help] It should display help about the opened dialog while pressing F1
945018 Defect [Output Manager] Unhandled exception appears while exporting a report with the same name to replace the opened old report file
947292 Defect Raceway variables don't display any Description in Element information for Raceway
948024 Defect [RacewayLabels]Duplicated label ‘Catalog Name’ in Metric System
948239 Defect [iModel Import] It should give more friendly and clear and consistent prompt when there's no referenced i-model file 
952958 Defect Default Cable Layout Method cannot be seen in Element Information for routed raceway
955258 Defect Equipment Cursor position snap and zoom doesn’t work
955875 Defect [Pre-Check Auto Routing Entry Points ] It should dispay "Equipment With No Autorouting Entry Points" in the title
964408 Defect [Publish i-model] There's no relationship under the Cable node for published i-model files
966986 Defect [EditFitting] incorrect bend fitting after edit a right bend 90 degree
974533 Defect Automatic routing line is connected from the middle of the conduit
982663 Defect BRCM: Duct Bank Generator Bottom Margin gets reset to zero when selected to generate Duct bank concrete 
995759 Defect [OPSE] The default values of the Trapeze Tray Support are incorrect
995763 Defect [OPSE] The Spacing, Minimum Start Offset and Minimum End Offset values of the Trapeze Tray Support cannot be maintained
996196 Defect [OPSE] The Center Hung Tray Support units cannot be converted automatically in metric system (according to design file unit)
996530 Defect [Ductbank] Bottom Margin of concrete cannot be automatically calculated according to the spacer size
999193 Defect Cannot Edit bend radius 
1004207 Defect "BRCM Community" link doesn't work for BRCM CE
Recommended
Related
Communities
Support and Services
Training and Learning
Social Media