How To Remove The Cut Piece Identifier And Cut Piece List From The ISOGEN Iso [TN]


	Applies To

	Product(s):	AutoPLANT Isogen
	Version(s):	All
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

To Remove Cut-Piece Identifier and List:

1. Load Project Administrator and drill down to the Isogen section of the project in question.
2. Under the INPUT section, hit the Edit button next to the Options Switches line.\
3. Once the Option Switches Editor is open go to page 2 of the MATERIAL LIST tab.
4. The available settings for Option Switch 2 are as follows:

SWITCH POSITION 1 - Cut Piece Numbering and Cut Piece List on/off control.

0 - Default for No Cut Piece List or Cut Piece Identification Numbers/Letters.
1 - Cut Piece List and Cut Piece Identifiers generated.
2 - Cut Piece Identifiers starting at 1 (one) or A on each isometric drawing.

SWITCH POSITION 2 - Cut Piece List Style.

0 - or blank Default for Old Style Cut Piece List.
1 - For New Style Cut Piece List.

To remove the Cut Piece Identifier and Cut Piece List from the Isogen ISO, set Switch Position 1 to 0 and leave Switch Position 2 blank.

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!