You are currently reviewing an older revision of this page.
When user upgrading APM V8i to AP_OPIM CE the gasket tick are not appearing after doing customization in Style.cfg file for Isometric style. They do appear correctly if user change the isometric style to the default IFC isometric style.
This Wiki article explains procedure on how to remove L shape gasket tick from the dimension
1. Open the Style.cfg file from the location and do the changes as shown in below image.
C:\ProgramData\Bentley\Plant V8i\Bentley Plant V8i Projects\SAMPLE_METRIC\Config\OpenPlant\Isometrics\styles\IFC\config
2.Gasket Tick is appearing in L shape, it should appear separately as dotted line.
3.Open Project Administrator, select the working Project > select relevant style > click on update to launch Isometric configuration as shown in below image.
4.Click on Seed file
5.In OpenPlant Isometrics Manager, Select Drawing > Annotate > click on Dimension Styles as shown in below image.
6.In Dimension Style, Select Text tab and change Font to 1 WORKING font as shown in below image.
7.The Gasket tick is now appearing in dimension properly.
Customization - AutoPLANT Modeler All customization related issues will be discussed in this section. Last edited over 6 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!