OpenPlant Isometrics for AutoPLANT settings for Project Isometrics

Overview

How to set the Isometrics setting for complete Project in OpenPlant Isometrics Manager for AutoPLANT.

Steps to Accomplish

This Section Let user define Isometrics Settings which will apply to the entire Project allowing for all Isometrics in a Project to be generated using these same settings.

1. Below given option is provided to let user define when to delete the Intermediate File. If the value is set to (0), then the files will not be deleted.
   
   
   

   
   

2. Default Isometrics Style: Select an Isometrics Style from the drop down Window, this will be the default style generated when selecting Generate Project Iso option from an AutoPLANT Modeler session.
   
   
   
   

3. Criteria: This dialog enables user to define the criteria fields that will be available for Naming Rule of Sheet. Select fields from the Available Column and press Add-> to make them available for this operation. Select Field from the Selected Column list and press <-Remove to remove this from the list of available fields.
   
   
   
   
4. Naming Rule: Assign the default naming rule that will be used to name the Isometrics output drawing.
   
   
   
   All these above Project Isometrics settings can be activated by check in the below mentioned option while generating isometrics from AutoPLANT in session.
   
   

See Also

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!