How to Add Mitered Elbow in Existing Catalog using Specification Generator

Overview

How to Add Mitered Elbow in Existing Catalog using Specification Generator

Steps to Accomplish:

1. Open AutoPLANT Specification Generator and open required Project.
2. Once the Project is selected open Component Manager as shown in below screenshot.
   
   
   
3. Launch Component Manager to search Mitered Elbow present in all Catalogs.
   
   
   
4. Select all the Catalogs to search Mitered Elbow present in Catalogs.
   
   
   
   
   
5. For searching Mitered Elbow, we need to add GTYPE = MIT in the filter.
   
   
   
   
   
6. Mitered Elbow are available in Non-Standard.Mdb catalog under FAB_FIT table.
   
   
   
7. Now to add Mitered Elbow in Existing Catalog follow steps as per below screenshot.
   
   
   
   

8. Select the Catalog.
   
   
   
9. After selecting Catalog, go to EDIT<Edit Database Schema as shown in below screenshot.
   
   
   
10. Click on Import Table.
    
    
    
11. Now select Non-Standard Catalog to import the Mitered Elbow in Existing Catalog.
    
    
    
12. Select FAB_FIT table and click on OK to Import the table in Existing Catalog.
    
    
    
    
13. Now Mitered Elbow are successfully added in Catalog.
    
    

See Also:

https://communities.bentley.com/products/plant/w/plant_design_and_engineering__wiki/35584/customization-autoplant-modeler

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!