Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
  • Welcome
  • Products
  • Support
  • About
  • More
  • Cancel
AutoPLANT | OpenPlant | PlantWise
  • Product Communities
  • More
AutoPLANT | OpenPlant | PlantWise
AutoPLANT | OpenPlant | PlantWise Wiki How to configure Raceway IDs in BRCM CONNECT
    • Sign in
    • -AutoPLANT | Bentley Raceway and Cable Management | OpenPlant | PlantWise Wiki
      • +OpenPlant
      • +Bentley AutoPLANT
      • +Bentley Navigator
      • +Bentley PlantSpace
      • +Plant Project Tools
      • -Bentley Raceway and Cable Management
        • Bentley Raceway and Cable Management Product Compatibility
        • -CONNECT Edition - Bentley Raceway and Cable Management
          • +Resolved issues in Bentley Raceway and Cable Management Releases
          • +AutoPlace Conduit tool - BRCM CONNECT Edition
          • +Cable Reports- Cable Pull Cards and Cable Drums-Bentley Raceway and Cable Management CONNECT Edition
          • +Cable Routing-BRCM CONNECT Edition
          • +Drawing generation - Bentley Raceway and Cable Management CONNECT Edition
          • How to clear the imported cable or equipment data from Database in the Bentley Raceway and Cable Management CONNECT Edition
          • How to Import Cable List into BRCM CONNECT
          • +i-Model - Bentley Raceway and Cable Management CONNECT Edition
          • +Installation_Configuration - BRCM CONNECT
          • +Power Platform Support - BRCM CONNECT Edition
          • +Project Setup- Bentley Raceway and Cable Management
          • +ProjectWise Integration - Bentley Raceway and Cable Management CONNECT
          • +Raceway Design Tools - Bentley Raceway & Cable Management
          • -Raceway IDs - Bentley Raceway and Cable Management CONNECT
            • How to Assign Same Level to Different Drawing Elements
            • How to configure Raceway IDs in BRCM CONNECT
            • How to Define Raceway ID while Routing Raceway in BRCM CONNECT
          • +Reports - Output Manager - BRCM CONNECT Edition
          • To View the Contents of DGN File in BRCM Explorer after Referencing a DGN from OpenPlant Modeler
          • +Underground System - Bentley Raceway and Cable Management CONNECT Edition
          • +User Defined Attributes (UDA) Settings - Bentley Raceway and Cable Management CONNECT Edition
          • +Components Center - Bentley Raceway and Cable Management CONNECT Edition
          • +i-Twin Services-Bentley Raceway and Cable Management CONNECT Edition.
        • How to Download Bentley Raceway and Cable Management
        • +V8i - Bentley Raceway and Cable Management
        • +What's New in Bentley Raceway and Cable Management Releases
      • i-model Composition Service for S3D
      • Working from home with OpenPlant
      • Working from home with Bentley Raceway and Cable Management
      • Working from home with AutoPLANT Modeler
    • How to Associate the Specification Based on Service in OpenPlant Modeler Connect

     
     Questions about this article, topic, or product? Click here. 

    How to configure Raceway IDs in BRCM CONNECT

      Product(s): Bentley Raceway and Cable Management
      Version(s): 10.03.00.25
      Environment: N/A
      Area: Raceway IDs
      Subarea: N/A

    Background

    There are multiple Raceway systems which consist of Cable Ladder, Cable basket, Cable Tray, and Conduit. Each raceway system can be assigned a Raceway ID by defining a macro comprised of different types of attributes. Different attributes of the raceway system include the voltage level (LV, MV, CTRL, IW, COM) , Raceway Type, Position and other such attributes. The Position Attribute depicts the Raceway position in the grid found in the Raceway Router dialog. The position is defined by the column name and row number such as” A1”, “ B1 “.




    This document explains the steps that should be followed while assigning Raceway ID’s to raceway systems and how the Position Attribute can be added to Raceway IDs.

    Steps To Follow-

    1. Go to Raceway>> Raceway IDs.




    2. In the Raceway ID and segments dialog that opens -right click on the blank grey area to choose options through which raceway id can be assigned. For raceway ID assignment you can select single segment and multiple segments according to the requirement.




    3.Select Add Multiple Segment (selection) and select the segments of raceway. After selection, the Raceway Ids and segments dialog opens again and the selected raceway segments get populated at the top of the dialog box.







    4. Select the ‘Position‘ attribute from the attribute picklist. User can select any attribute from the list of attributes as per requirements.




    5. After selecting the position attribute ,click on Insert Attribute so that the raceway position gets added in the raceway macro.




    Note-$(RW_Number) is the Raceway Macro for the ‘Position’ attribute of the raceway.

    6.Click on Insert Id so that the Raceway ID gets updated in the raceway macro.


    Note- Segment ($,0,n) is the Raceway Macro for Raceway ID. By default it has a start value of 1 and gets incremented by 1 for each new raceway. However the value can be changed as per requirement. 
     
    7. After both Position attribute and Raceway ID are inserted, click Apply so that the Name field gets updated with the values of Raceway Number and Raceway ID.



    8. To display the assigned Raceway ID in the model, Click on Apply so that the Current Name (Model) field gets updated with the Raceway Number and Raceway ID.



    9. Click Ok to display the Raceway ID on the model. Repeat steps 1-9 for Raceway position “B1”. The same steps can be followed for different positions of Raceways. After Position Attribute is added and Raceway IDs are assigned they are displayed on the Raceway.



      Original Author: Lalitesh Vaidyar

    Keywords: BRCM CONNECT, RacewayID , Segments($,0,n) , Position, Insert Attribute, Insert Symbol.

    • CONNECT Edition
    • BRCM
    • Raceway IDs
    • BRCM CONNECT Edition
    • Raceway Router
    • en
    • Share
    • History
    • More
    • Cancel
    • Lalitesh Vaidyar Created by Bentley Colleague Lalitesh Vaidyar
    • When: Fri, Oct 11 2019 10:35 AM
    • Lalitesh Vaidyar Last revision by Bentley Colleague Lalitesh Vaidyar
    • When: Fri, Oct 11 2019 10:53 AM
    • Revisions: 3
    • Comments: 0
    Recommended
    Related
    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2021 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies