In Bentley Raceway and Cable Management (BRCM) there might be a need to display a particular raceway route or raceway from multiple raceways .There is a feature available called as Display Sets which enables to view only the selected components. Display Sets cannot be directly used in BRCM for multiple raceways selection, hence a Graphical Group is created for the raceway to be viewed together and the Display Set is applied for Graphical Group.
1. Launch the application and open Raceway DGN file. 2.In the Raceway tab, Click on Drop Element drop down menu and select Add to Graphic Group to create a Graphic Group for the Raceways.3.In the Add to Graphic Group dialog that is displayed , Click Create Named Group and provide a suitable name to the Graphic Group to be created. Click Ok to select the raceways which need to be included in the Graphic Group.4.For instance two raceways are selected to be added to the Graphic Group , then select the two raceways and provide a datapoint to confirm the selection. After the selection click on open Named Group dialog to view the Graphic Group created and the elements added to the group.5.In the Named Groups dialog right click on the created graphic group and select Set Displayset to apply the Displayset to the created graphic group.6. After the Displayset is applied to the created Graphic Group , only the raceways that have been added to the Graphic Group will be displayed.