Applies To | |
Product(s): | OpenPlant Isometrics Manager |
Version(s): | 08.11.09.XXX(SS5) | 08.11.11.XXX (SS6) |
Environment: | Windows 7/8.1/10 (64 bit) |
Area: | OpenPlant Isometrics Manager for AutoPLANT |
Subarea: | Installation |
Original Author: | Abhijit Bute, Bentley Product Advantage Group |
During OpenPlant Isometrics Manager CONNECT Edition installation procedure user need to select the correct options. Following are the steps of installation for OpenPlant Isometrics Manager CONNECT Edition installation
After installation of AutoPLANT Modeler CONNECT, Run OpenPlant Isometrics Manager CONNECT exe. See step by step procedure
Click on Finish and OpenPlant Isometrics Manager is ready to use along with AutoPLANT Modeler.
When a version of OpenPlant Isometrics Manager exists on the user machine and he wants to upgrade it to the latest version then he needs to follow the below mentioned steps.
communities.bentley.com/.../openplant-isometrics-manager-for-autoplant
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!