In Bentley Raceway and Cable Management (BRCM) there might be a need to display raceway rungs on a different level than the raceway. For visualization purposes and to differentiate between the raceway side rails from raceway rungs the raceway rungs can be assigned a different level than the raceway side rails . In the Level Manager tool the properties of level to which the raceway and raceway rung is assigned can be edited. This enables the visualisation of raceway side rails and raceway rungs. The raceway rungs can be assigned on a different level through a simple setting in the Raceway Settings tool.
.1. Launch the application and open Raceway DGN file.2.In the Raceway tab, Click on Raceway Settings tool.3. In the Raceway Settings tool dialog , Turn On Create rungs on a different level option.4.Route a raceway and it can be seen that the raceway rungs are assigned a different level than the raceway side rails.5.Go to Level Display to check the active levels assigned.6.If raceway is assigned to a level ‘E-RACEWAY’ then the application creates a new level for the raceway rungs named as ‘E-RACEWAY-RUNGS’. The display of the levels can be turned on and off as per requirement.7.Go to Level Manager. In the Level Manager , the level properties and the attributes can be edited. The color , line style and line weight can be edited as per requirement.8.The level for the raceway rungs can be turned on or turned off from Level Display.
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.