To Fix Gasket and Fasteners Issue if not getting Generated on Flanged Joints in OpenPlant Modeler CONNECT Edition

Applies To
Product(s):	OpenPlant Modeler CONNECT Edition
Version(s):	10.07.00.32 Update 7
Environment:	Windows 8.1/10 (64-bit)
Area:	Customization/User InterFace
Subarea:
Original Author:	Ashutosh Patil,Bentley Product Advantage Group

Background

Due to certain customization sometimes while adding extra end preparation, The Joints for Flanges does not generate Gasket and Fasteners. Hence this wiki help in fixing the issue with the help of OpenPlant Project Administrator CONNECT Edition.

Steps to Accomplish

Launch Open Plant Project Administrator CONNECT Edition U7.
In OpenPlant Project Administrator CONNECT Edition, Considering default Workspace and OpenPlantMetric project Click on application OpenPlant Modeler.
Select Joint Map in Settings as shown and highlighted in image below.
Joint Map dialog box gets launched for that respective project: It can be seen that In Flange Joint -Is Specification Driven is not selected .
Similarly for respective end joint it can be verified which does not generates Fasteners and Gasket on placement.
Select or Click on the Box and Is specification Driven gets selected by displaying a tick sign into it and Click on Save.
Launch OpenPlant Modeler CONNECT Edition.
Assign Associates through standard preferences and place Pipeline with Flange to Flange joints.
It can be seen that we Fasteners and Gasket gets generated on joints when flanges is getting Placed.