How to enable the specific Component Tags to be shown in Isometrics Using User Label.
User is not getting the Tags for some specific Components in the Generated Isometrics. Below given steps for how to set the User Label for any specific component and how to call different drawing attributes in generated Isometrics.
1.Generate Isometrics of the component in .Dgn output that you want to show tag on generated Isometrics
2.After generating Isometrics check Component Tag as per below given steps.
3.After ‘Show Component Tag’ drop down window opens check for the attribute you want to use for enabling user Labels from Isometrics Customization window
Note: EC_CLASS can be used as well to put in User Label, We will use IE_TYPE and associated value in user label.
4.Open Project Administrator.
5.Open Isometrics Configurations drop down window as per below steps.
Note: NAME: Orifice Tag b. INCLUDE: IE_TYPE=CT. c. TEXT: $(IE_TAG), As we need to populate the Tag of given component
Put other values and save and close Isometrics Configuration Dialog Box.
6.Generate Isometrics and verify that Now we are able to show Tag Data on generated Isometrics.
Similarly we can add Tag for different components as well.
Now Tag are populating in Isometrics Drawing.
AutoPLANT - OpenPlant Isometrics Manager CONNECT Edition
OpenPlant Isometrics Manager CONNECT - AutoPLANT
AutoPLANT Modeler CONNECT Edition
Work remotely or connected with the market’s most productive and easy-to…
Last edited over 3 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!