To achieve Olet Tag in OpenPlant Isometrics Manager.
There could be requirement to get tag number on Olets in Isometrics. Below are some simple steps to accomplish this necessity. This has been shown in context with AutoPLANT Modeler and OpenPlant Isometrics Manager.
1.Open Project Administrator.
2.Open Isometric configuration dialog through Project Administrator. See image below.
3.Under ‘User Label’ tag Enter the data with steps 1,2,3, as shown in image below. Assign all the value of component attribute. Selection of the expression IE_TYPE should be done carefully to get it appear in isometrics. This can be checked and confirmed from the component tag list shown in this step later.
4.Click ‘Save’ and generate the isometric, the IE_TAG value will get displayed. See image below. (IE_TAG value has been taken for reference).
5.User can also set the other component attribute value in User label dialog as per requirement. To get the component attribute information see image below for reference.
AutoPLANT - OpenPlant Isometrics Manager CONNECT Edition
OpenPlant Isometrics Manager CONNECT - AutoPLANT
AutoPLANT Modeler CONNECT Edition
Work remotely or connected with the market’s most productive and easy-to…
Last edited over 3 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!