While working with AP_OPIM when tried to generate isometric drawing, user gets thick Line Weight in Isometric drawing in DWG format which is not ideal output.
In AP_OPIM CONNECT while creating isometric drawing, user gets thick Line weight in isometric drawing for DWG format but Line Weight for DGN format shows correctly. There might be some issue with DGN to
DWG conversion settings and this setting are saved in opim.dws file which is located under each style folder.
This wiki article explains the steps to resolve this issue.
1.Open Project Administrator
2.Open the isometric configuration for particular working project.
3.Open Seed file
4.After opening Seed file, go to File and click on Save As option
5.Select Save As type as Autodesk DWG files and click on Options tab
6.Expand Line Weights section
7.Set the DWG Weight in between 0.07-0.09 MM and save the DWG Settings file.
Isometric Output:
AutoPLANT - OpenPlant Isometrics Manager CONNECT Edition OpenPlant Isometrics Manager CONNECT - AutoPLANT See Also AutoPLANT Modeler CONNECT Edition Work remotely or connected with the market’s most productive and easy-to… Last edited over 3 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!