In OpenPlant Modeler CONNECT Edition, the requirement is to disable the terminator of the leader line in isometric via OPIM CE.

Background

In OpenPlant IM CE, a new tool has been introduced to disable the terminator of the leader line. By default, the terminator for a leader is shown as attached in the snap below

Steps to Accomplish

1. Launch OpenPlant Modeler CONNECT Edition.
   
   
   
   
2. Select the desired workspace & workset from the interface, Place a pipe & flange arrangement with the blind flange at the end as shown
   
   
   
   
3. From pipeline manager, select pipeline, choose the required isometric style (here CHECK) & auto-generate the iso-sheet as shown
   
   
   
   
4. Again, select pipeline & generate iso as shown
   
   
   
   
5. Once done, the OpenPlant Isometric Manager interface will open. Launch style editor as shown
   
   
   
   
6. Select the style as a check, move to leader settings & disable the terminator as shown & save.
   
   
   
   
7. Click on start. Once done, do right-click & select show isometric as shown
   
   
   
   
8. Once the isometric is opened, verify the results as below
   
   
   
   As shown, the terminator for the leader line is disabled now.

See Also

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround