User wants to add additional data in report.Example: Insulation Thickness.In this article we will add the field “Insulation Thickness” to the report. So to edit the report we will need to edit the Report Header as well as the Report Detail. The Report Header will just be text describing the information found below. The Report Detail will be a token to pull information into the report from the database for that particular field. Both are cells in the Bom.cel Library. So in this instance we need to figure out the following:
Launch OpenPlant PID in your desired project unit.
Go to Utilities > Reports
Right-Click on Pipeline List and select Edit as shown below
Set settings as shown below and click on Ellipse.
In Search dialog click on "including these properties". Refer image below
Check the field you wish to add to be made available to the report. Here, “Insulation Thickness” as shown below and OK
We now need to know what cell in the bom.CEL library to modify. To get this information we will Edit the Reports properties and get the value for the following:
Detail Cell – Where the data will appear in the report. Header Cell – The header of the report.
From OpenPlant PID menu bar, Select File > Open.
Browse to the C:\ProgramData\Bentley\OpenPlantPID (SS6)\WorkSpace\Projects\OPPID_Imperial\Dataset\cell & select Bom.cel to open
Select Model > Double-Click on Pipeline Row as shown below.
Stretch the Reports Dividing row line and horizontal line so that it includes the new row.
Copy a working token and rename it to your new token to be used. In this instance we will give it a token name: %INSULATION_THICKNESS
Arrange boxes and Text as shown below.
Note: The % is very important. It signifies any text after it will be recognized as a token.
In the Model window select and double click the Pipeline Sub Header.
As above copy a pre-existing Header.
Rename to best describe the new field added as the token. Move the separation lines to make it match the PipeLine Row section.
Save and Exit.
Open OpenPlant PID with a new or pre-existing drawing and Verify result.
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU