Background

In OpenPlant Project Administrator CONNECT Edition, User add project with required Application e.g OpenPlant Modeler (OPM), OpenPlant PID (OPPID) as shown below in project Test Metric which consist of BRCM, OPM, OPPID-B. But if later on other application like OpenPlant Support Engineering(OPSE) , OpenPlant Orthographic Manger(OPOM) is installed but don’t get reflected in same Workset somehow like OpenplantMetric Project- A.
So this wiki will help in how other applications should get enabled for current existing Workset.

Steps to Accomplish

1. To Enable other Applications of OpenPlant for particular workset. Select or Click on that Particular Workset go to Configuration→Enable as shown in image below :
    
   
   
   
2.   OpenPlant Workset Product Enable Wizard dialog box gets launched, Click on Next in it.
   
    
   
3. After hitting on Next the installed application which are not enabled for the respective projects is seen as deselected as highlighted below.
   
    
   
   
4. Select the Applications which need to be enabled  such that tick would be seen as shown in below image for OpenPlant Support Engineering and Openplant Orthographics Manager.
   Then proceed to click on Enable
    
   
   
5.  After completing the process for enabling the respective application click on Finish. 
   
   
   
6. Application for newly created Project Test-Metric  gets enabled and are ready to use.
   
   

See Also

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround