While placing nozzles on each equipment, one can notice that the nozzle numbers are not resetting to 1 and instead incrementing from the nozzle number last placed.
Place two Equipment V-0001 and V-0002. Place two Nozzles on V-0001 and then the next one on V-0002. Notice that the third Nozzle placed on V-0002 takes tag as V-0002-N3 instead of V-0002-N1.
1. In the Class Editor, see the new “Requires Unique BusinessKey” custom attribute already attached to Nozzle class but with no relationship value as seen below.
2. Add the required relationship.
4. Open OPPID CE and see a desired result in OPPID CE where the Nozzle numbers are now resetting to 1 for every new Equipment/Component.
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!