In OpenPlant Isometrics Manager, sometimes isometrics drawing does not show the fixed scaling of PARTID Labels for welds of the drawing. The Size of the PARTID Label gets increased for a few of the welds in the isometric drawing. This wiki explains the steps on how to fix the scaling of PARTID Labels of the welds. The below explanation has been illustrated in context with AutoPLANT Modeler & OpenPlant Isometrics Manager.
1.Open the Project Administrator
2.Navigate to the Project and launch the Isometrics Configuration dialog
3.Select the working Isometric Style, click on Part ID Labels and changed the Cell to WELDID as shown in below snapshot.
4.Generate the isometrics and review the result.
5.The PARTID scaling will show the uniform size for all the weld
AutoPLANT - OpenPlant Isometrics Manager CONNECT Edition OpenPlant Isometrics Manager CONNECT - AutoPLANT See Also AutoPLANT Modeler CONNECT Edition Work remotely or connected with the market’s most productive and easy-to… Last edited over 3 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki
If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group. Please include a list of all relevant details to get in depth analysis for a solution or workaround.
Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!