Background

OpenPlant Modeler allow user to apply a SPEC_GROUP_FILTER attribute which group specifications according to the Service selected.  This allows user to limit the number of specs to choose from in the Specification list when defining a pipeline using a service.

Steps to Accomplish

1. Launch Bentley Class Editor.
2. Open OpenPlant_3D.01.08. ecschema of respective workset as shown below
   
   
   
   
3. Supplement with OpenPlant_3D_Supplemental_Modeling.01.08.ecschema and OpenPlant_3D_Supplemental_ModelingViews.01.08.ecschema.
   
   
   
   
4. Navigate the "Associated Item List for Piping Network System" class and select SERVICE property as shown below
   
   
   
   
5. Add "SPEC_GROUP_FILTER" custom attribute to the SERVICE property.
6. Ensure to change schema location to Openlant_3D_Supplemental_Modeling.01.08 as shown below
   
   
   
   
7. Click OK on warning message, as there is no property defined on SPEC_GROUP_FILTER class.
   
   
   
   
8. Save all the change & close the schema.
9. Navigate to Settings folder which is present under workset folder.
   
   
   
   
10. Create a new text file with name as SERVICE.txt & defined Specification for service as shown below
    
    
    
    
11. Save & close file.
12. Launch OpenPlant Modeler. Create new Pipeline and verify results as shown below
    
    For service SW
    
    
    
    For service FW
    
    

See Also

How to Associate the Specification Based on Service

Applies To Product(s): OpenPlant Modeler Version(s): 08.11.09.XXX (SS5) | 08.11.11.XX (SS6) Environment: Windows 7/8.1/10 (64 bit) Area: Properties Subarea: -…

Last edited over 4 years ago in OpenPlant | AutoPLANT > OpenPlant | AutoPLANT Wiki

Still a Problem?

If above problem persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround.