Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
  • Welcome
  • Products
  • Support
  • About
  • More
  • Cancel
OpenPlant | AutoPLANT
  • Product Communities
  • More
OpenPlant | AutoPLANT
OpenPlant | AutoPLANT Wiki Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.00.74)
    • Sign in
    • -OpenPlant | AutoPLANT Wiki
      • +OpenPlant
      • +Bentley AutoPLANT
      • +Bentley Navigator
      • +Bentley PlantSpace
      • +Plant Project Tools
      • -Bentley Raceway and Cable Management
        • How to Download Bentley Raceway and Cable Management
        • Bentley Raceway and Cable Management Product Compatibility
        • -CONNECT Edition - Bentley Raceway and Cable Management
          • -Resolved issues in Bentley Raceway and Cable Management Releases
            • Resolved issues in Bentley Raceway and Cable Management CONNECT Edition, 10.00.00.127
            • Resolved issues in Bentley Raceway and Cable Management CONNECT Update 1, 10.01.00.21
            • Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 2 (10.02.00.25)
            • Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 3 (10.03.00.25)
            • Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 4 (10.04.00.31)
            • Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 5 (10.05.00.54)
            • Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.00.74)
            • Resolved issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.01.18)
            • Resolved issues in Bentley Raceway and Cable Management CONNECT Update 10 (10.10.00.71)
          • +What's New in Bentley Raceway and Cable Management Releases
          • +Manufacturer Based Raceway Content in Bentley Raceway and Cable Management
          • +AutoPlace Conduit tool - BRCM CONNECT Edition
          • +Cable Reports- Cable Pull Cards and Cable Drums-Bentley Raceway and Cable Management CONNECT Edition
          • +Cable Routing-Bentley Raceway and Cable Management CONNECT Edition.
          • +Drawing generation - Bentley Raceway and Cable Management CONNECT Edition
          • +i-Model - Bentley Raceway and Cable Management CONNECT Edition
          • +Installation_Configuration - BRCM CONNECT
          • +Power Platform Support - BRCM CONNECT Edition
          • +Project Setup- Bentley Raceway and Cable Management
          • +ProjectWise Integration - Bentley Raceway and Cable Management CONNECT
          • +Raceway Design Tools - Bentley Raceway & Cable Management
          • +Raceway IDs - Bentley Raceway and Cable Management CONNECT
          • +Reports - Output Manager - BRCM CONNECT Edition
          • +Underground System - Bentley Raceway and Cable Management CONNECT Edition
          • +User Defined Attributes (UDA) Settings - Bentley Raceway and Cable Management CONNECT Edition
          • +Components Center - Bentley Raceway and Cable Management CONNECT Edition
          • +i-Twin Services-Bentley Raceway and Cable Management CONNECT Edition.
          • +Equipment & Cable List Import-Bentley Raceway and Cable Management CONNECT.
          • +Interoperability
        • +V8i - Bentley Raceway and Cable Management
      • i-model Composition Service for S3D
      • Working from home with OpenPlant
      • Working from home with Bentley Raceway and Cable Management
      • Working from home with AutoPLANT Modeler
      • Your Feedback is important to us!

     
     Questions about this article, topic, or product? Click here. 

    Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.00.74)

    ID Title
    182439 After removing design files from ProjectWise and refreshing the Collaboration Manager the files are not removed from the list of resources.
    182402 Automatic routing on raceway with multiple divider sections of the same voltage level only fills one of the sections.
    181930 [BESM] The Support Width and Primary Size units cannot be converted automatically in metric system (according to design file unit)
    182376 Duct bank section graphics text "Is Annotation" setting was not set properly resulting in wrong text sizes.
    173406 [Raceway Router]Modify UDAs of existing raceway catalog, the UDAs cannot display in the Raceway Routing Tool/Start dialog in time.
    173409 [Place Equipment]The equipment name loses the leading zeros if setting the Start value as 001 and placing multiple equipment.
    444531 BRCM CE Russian | Raceway is not properly modeled for DKC Cable Ladder Combitech Catalog.
    448898 BRCM CE U4 | Cable entries get duplicated in Raceway fill info dialog.
    393494 BRCM crashes after acknowledging the deleted cables
    279101 BRCM Crashes with no error after running reports if any part/fitting from the raceway catalog is removed.
    296242 Annotation scale settings should apply to the 2D extraction graphics if equipment 2D cell is set as annotation cell.
    483834 While using 2D Extraction for the cell based equipment the software would apply an offset and scaling that wasn't desired in some instances.
    535171 Incorrect Voltage Level assigned to the Vertical Bends after generating concrete for duct bank conduits.
    287399 Copy Manhole does not delete trimmed ductbank concrete elements.
    268121 Level Display does not auto refresh when Filter is used
    281273 [Equipment Properties: Component Center] Instead of showing Properties of already placed Equipment, Equipment Properties dialog shows the new default properties and apply them to the selected component when click "OK"
    310855 Placing supports in file gives an error and crashes the application in a workset created from OPPA
    362569 The item browser is not Showing the ECproperties data for cable. 
    369932 [Cable Manger] "Filter Cables with Same Terminal" takes a long time to execute.
    370000 [Cable Reports] Upload to Projectwise message appears on creating Cable Drums even when working with a local WorkSet.
    440764 [Cable Manager] Performance issue with larger number of cables and Equipment
    414433 Duplicate BRCM_DB_ID is created when creating projects in OPPA
    286480 The BRCM_DB_STATIONID variable should be set to the user's machine name.
    449221 [integration with OPM] Wrong dataset Version in Configuration_Properties.cfg file
    454497 [Russian Build] Raceway Router is not working in Russian Build with Russian Regional Setting after Updating dataset 
    317669 In some cases the 3D cable generated was not continuous.
    317670 After 3D cable was generated in a particular instance the cable length was not correct in the cable manager
    317671 Under certain conditions the 3D cables generated were not smooth.
    317672 3D cables lay out improperly on a vertical fitting
    352380 If importing cable types with excel that had the same name but with different upper and lowercase letters it would import them both rather than recognizing them as duplicates.
    286056 Locking a resource in the Collaboration Manager using the ID Manager is not setting the Action field to ID Manager
    509841 Wrong Concrete Material Volumes calculation in Metric dataset
    385479 Inserting a Manhole in a Ductbank does not delete all parts inside the manhole.
    448771 Performance Issue - Check Routing Connectivity Tool was slow to execute in certain scenarios.
    365450 Using the ID Manager to Move IDs requires the user to select the destination equipment two times and there are no prompts
    504864 Importing a database backup resulted in incomplete naming in the location cable property shown in the Cable Manager.
    519019 Collaboration Manger shows all revisions of the same DGN rather than just listing the latest.
    454175 Raceway Connectivity Tool falsely reports that there is no raceway connectivity when in fact there is.
    392275 [OPM Integration] We should remove drawing types that are not required from the Document Manager inside of OpenPlant Modeler.
    357640 [Integration with OPM] Equipment Properties command is not working
    523360 The 3D cable generated inside of a Trench  didn't follow the routing line.
    523486 [Raceway Size] Raceway Size Command did not work in a particular file that contained mismatched variant and routing line GUIDs.
    544149 [Raceway Routing] Automatic Raceway part placement is not working for Cable Basket in Imperial Workset 
    548975 One of the metric sample models reference DGN had embedded schemas 
    535152 Conduit IDs did not get assigned after generating concrete around a placed branch of duct bank.
    • CONNECT Edition
    • 10.09.00.74
    • bentley raceway and cable management
    • Resolved Issues
    • Share
    • History
    • More
    • Cancel
    • Scott Walker Created by Bentley Colleague Scott Walker
    • When: Wed, Mar 24 2021 10:45 AM
    • Aadarsh Tale Last revision by Bentley Colleague Aadarsh Tale
    • When: Thu, Mar 17 2022 7:24 AM
    • Revisions: 2
    • Comments: 0
    Recommended
    Related
    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2021 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies