Bentley Communities
Site
Search
User
Site
Search
User
Product Communities
OpenPlant | AutoPLANT
OpenPlant | AutoPLANT Wiki
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.00.74)
Sign In
-
OpenPlant | AutoPLANT Wiki
+
OpenPlant
+
Bentley AutoPLANT
+
Bentley Navigator
+
Bentley PlantSpace
+
Plant Project Tools
-
Bentley Raceway and Cable Management
How to Download Bentley Raceway and Cable Management
Bentley Raceway and Cable Management Product Compatibility
-
CONNECT Edition - Bentley Raceway and Cable Management
-
Resolved issues in Bentley Raceway and Cable Management Releases
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 1, 10.01.00.21
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 2 (10.02.00.25)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 3 (10.03.00.25)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 4 (10.04.00.31)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 5 (10.05.00.54)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.00.74)
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.01.18)
Resolved issues in Bentley Raceway and Cable Management CONNECT Edition, 10.00.00.127
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 10 (10.10.00.71)
Resolved issues in Bentley Raceway and Cable Management CONNECT Update 11 (10.11.00.222)
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 11 (10.11.01.144)
+
What's New in Bentley Raceway and Cable Management Releases
+
Manufacturer Based Raceway Content in Bentley Raceway and Cable Management
+
AutoPlace Conduit tool - BRCM CONNECT Edition
+
Cable Reports- Cable Pull Cards and Cable Drums-Bentley Raceway and Cable Management CONNECT Edition
+
Cable Routing-Bentley Raceway and Cable Management CONNECT Edition.
+
Drawing generation - Bentley Raceway and Cable Management CONNECT Edition
+
i-Model - Bentley Raceway and Cable Management CONNECT Edition
+
Installation_Configuration - BRCM CONNECT
+
Power Platform Support - BRCM CONNECT Edition
+
Project Setup- Bentley Raceway and Cable Management
+
ProjectWise Integration - Bentley Raceway and Cable Management CONNECT
+
Raceway Design Tools - Bentley Raceway & Cable Management
+
Raceway IDs - Bentley Raceway and Cable Management CONNECT
+
Reports - Output Manager - BRCM CONNECT Edition
+
Underground System - Bentley Raceway and Cable Management CONNECT Edition
+
User Defined Attributes (UDA) Settings - Bentley Raceway and Cable Management CONNECT Edition
+
Components Center - Bentley Raceway and Cable Management CONNECT Edition
+
i-Twin Services-Bentley Raceway and Cable Management CONNECT Edition.
+
Equipment & Cable List Import-Bentley Raceway and Cable Management CONNECT.
+
Interoperability
BRCM Update 11 To Save Database in PlantSight
How to Change Default Categories Order in Element Information Dialog in OPPID CE
How to Change the Color of the Raceway's Level
How To Configure BRCM Raceway Labels
How To Place Parametric Supports on Raceways
How to Publish iModels in BRCM
How To Route BRCM Concrete Trench
To Import an iModel in BRCM Update 11
To Resolve Finding and Deleting Hidden Cable Trays not visible in dgn and nor can be found via selection tools in BRCM
To Resolve Review Differences dialog not showing for iModel Import workflow
+
V8i - Bentley Raceway and Cable Management
i-model Composition Service for S3D
Working from home with OpenPlant
Working from home with Bentley Raceway and Cable Management
Working from home with AutoPLANT Modeler
Your Feedback is important to us!
Learning Content for OpenPlant
You are currently reviewing an older revision of this page.
History
View current version
Resolved Issues in Bentley Raceway and Cable Management CONNECT Update 9 (10.09.00.74)
ID
Title
182439
After removing design files from ProjectWise and refreshing the Collaboration Manager the files are not removed from the list of resources.
182402
Automatic routing on raceway with multiple divider sections of the same voltage level only fills one of the sections.
181930
[BESM] The Support Width and Primary Size units cannot be converted automatically in metric system (according to design file unit)
182376
Duct bank section graphics text "Is Annotation" setting was not set properly resulting in wrong text sizes.
173406
[Raceway Router]Modify UDAs of existing raceway catalog, the UDAs cannot display in the Raceway Routing Tool/Start dialog in time.
173409
[Place Equipment]The equipment name loses the leading zeros if setting the Start value as 001 and placing multiple equipment.
444531
BRCM CE Russian | Raceway is not properly modeled for DKC Cable Ladder Combitech Catalog.
448898
BRCM CE U4 | Cable entries get duplicated in Raceway fill info dialog.
393494
BRCM crashes after acknowledging the deleted cables
279101
BRCM Crashes with no error after running reports if any part/fitting from the raceway catalog is removed.
296242
Annotation scale settings should apply to the 2D extraction graphics if equipment 2D cell is set as annotation cell.
483834
While using 2D Extraction for the cell based equipment the software would apply an offset and scaling that wasn't desired in some instances.
535171
Incorrect Voltage Level assigned to the Vertical Bends after generating concrete for duct bank conduits.
287399
Copy Manhole does not delete trimmed ductbank concrete elements.
268121
Level Display does not auto refresh when Filter is used
281273
[Equipment Properties: Component Center] Instead of showing Properties of already placed Equipment, Equipment Properties dialog shows the new default properties and apply them to the selected component when click "OK"
310855
Placing supports in file gives an error and crashes the application in a workset created from OPPA
362569
The item browser is not Showing the ECproperties data for cable.
369932
[Cable Manger] "Filter Cables with Same Terminal" takes a long time to execute.
370000
[Cable Reports] Upload to Projectwise message appears on creating Cable Drums even when working with a local WorkSet.
440764
[Cable Manager] Performance issue with larger number of cables and Equipment
414433
Duplicate BRCM_DB_ID is created when creating projects in OPPA
286480
The BRCM_DB_STATIONID variable should be set to the user's machine name.
449221
[integration with OPM] Wrong dataset Version in Configuration_Properties.cfg file
454497
[Russian Build] Raceway Router is not working in Russian Build with Russian Regional Setting after Updating dataset
317669
In some cases the 3D cable generated was not continuous.
317670
After 3D cable was generated in a particular instance the cable length was not correct in the cable manager
317671
Under certain conditions the 3D cables generated were not smooth.
317672
3D cables lay out improperly on a vertical fitting
352380
If importing cable types with excel that had the same name but with different upper and lowercase letters it would import them both rather than recognizing them as duplicates.
286056
Locking a resource in the Collaboration Manager using the ID Manager is not setting the Action field to ID Manager
509841
Wrong Concrete Material Volumes calculation in Metric dataset
385479
Inserting a Manhole in a Ductbank does not delete all parts inside the manhole.
448771
Performance Issue - Check Routing Connectivity Tool was slow to execute in certain scenarios.
365450
Using the ID Manager to Move IDs requires the user to select the destination equipment two times and there are no prompts
504864
Importing a database backup resulted in incomplete naming in the location cable property shown in the Cable Manager.
519019
Collaboration Manger shows all revisions of the same DGN rather than just listing the latest.
454175
Raceway Connectivity Tool falsely reports that there is no raceway connectivity when in fact there is.
392275
[OPM Integration] We should remove drawing types that are not required from the Document Manager inside of OpenPlant Modeler.
357640
[Integration with OPM] Equipment Properties command is not working
523360
The 3D cable generated inside of a Trench didn't follow the routing line.
523486
[Raceway Size] Raceway Size Command did not work in a particular file that contained mismatched variant and routing line GUIDs.
544149
[Raceway Routing] Automatic Raceway part placement is not working for Cable Basket in Imperial Workset
548975
One of the metric sample models reference DGN had embedded schemas
535152
Conduit IDs did not get assigned after generating concrete around a placed branch of duct bank.