Background

Some project may have requirement to show Inch-Dia report in generated isometric

Steps to Accomplished 

1. Navigate to project location and select isometric working style.
   For ex: C:\ProgramData\Bentley\Plant V8i\Bentley Plant V8i Projects\SAMPLE_IMPERIAL\Config\OpenPlant\Isometrics\styles\As-Built\config 
   
   

2. Open Report.def file. add following lines.
   

     REPORT = WELD
     INCLUDE  = IE_TYPE = CT_WELD
     COLUMN   = 10:R: (SIZE1* 25.4):"#.#"
     COLUMN   = 10:R: "="
     COLUMN   = 20:L: SIZE1  +  "X"  +  QUANTITY
     COLUMN   = 10:R: "="
     COLUMN   = 20:R: (SIZE1 * QUANTITY):"#.#"
     GROUP    = SIZE1
     SORT = SIZE1
     SEP = @
     TEXT = @ ----------------------------------------------------------
     TEXT = @                  Inch-Dia Weld Report
     TEXT = @ ----------------------------------------------------------
     Write =
     END 

     REPORT = WELDDIA
     INCLUDE  = IE_TYPE = CT_WELD
     COLUMN = 150:L: "TOTAL INCH DIA"  @@@@@@@ + Total(SIZE1 * QUANTITY):"#.0"
     GROUP    = AAA
     SEP = @
     TEXT = @ ----------------------------------------------------------
     Write =
     END 

    REPORT = combi
    WRITE = WELD
    WRITE = WELDDIA
    NODE = 75
    END 
   
   

3. Generate isometric to review the result.         

See Also

Still a Problem?

If above problem still persists, then please create a Service Request and contact the Bentley Product Advantage group.  Please include a list of all relevant details to get in depth analysis for a solution or workaround. 

Comments or Corrections?

Bentley's Product Advantage Group requests that you please confine any comments you have on this Wiki entry to this Comments or Corrections?" section. THANK YOU!